Double-click here to change image
Drop Leg Platforms / Pouches
!

BlackHawk Omega Elite Shot Shell Pouch

!

Black

  • Patent # D500807
  • Made of 1000 denier NyTaneon™ nylon lined with closed cell foam
  • IVS™ back panel for increased ventilation and added comfort
  • Adjustable Lid Design on most pouches to fully secure each device
  • Carries (10) shot shell rounds in each pouch for a total of (20) rounds
  • Rounds are held firmly in place with heavy-duty 1.5" wide elastic
  • Elastic rubberized leg straps for stability and comfort
  • Drainage grommets in the bottom of pouches
  • Slotted webbing; adjustable and removable belt hanger, non-slip leg straps, and belt loops allow for four different configurations
        -Low ride drop leg with two leg straps
        -High ride drop leg with one leg strap
        -Belt-mounted
        -Alice clip configuration for attaching to a vest, pack, etc

BlackHawk Omega Drop Leg Extender w/o Quick Release

!
Black
  • Extends gear below the belt by five inches
  • Attaches to drop leg holsters, pouches, and rigs

BlackHawk Omega Drop Leg Extender w/Quick Release

!
Black, Coyote Tan, Foliage Green, Olive Drab
  • Extends gear below the belt by five inches
  • Attaches to drop leg holsters, pouches, and rigs

Condor MOLLE Drop Leg Platform

!
Black, Coyote Tan, Multicam, Olive Drab

Molle Drop Leg Holster Panel With Pouches

!
Army Digital, Black
  • Made of rugged synthetic material
  • Comes with 3 detachable mag/utility pouches
  • Adjustable leg strap, pistol/duty belt Velcro® attachment with quick release buckle

Specter Gear 2 Mag, 30 rd. 5.56mm M-16/AR-15 Mag Tactical Thigh Rig

!

Army Digital Black, Coyote Tan, Olive Drab

 

This rig carries 2 mil-spec M-16/AR-15 type 5.56mm 30 round magazines in two pouches attached to a leg shroud with a vertically adjustable hanger strap to suspend the pouches below the belt line with 2 adjustable 2" wide leg straps to secure the assembly to the upper thigh.

The pouch bodies are constructed with a 1000 denier nylon outer layer and a 420 denier nylon inner layer. The pouches feature both hook and loop as well as side release buckle closures for maximum versatility and pouch security. Each pouch is supplied with a removable hook and loop silencer pad for quiet side release buckle operation. The flaps are constructed from 2 layers of nylon webbing for just the right degree of stiffness and to resist wear through points. All stitches are made with heavy duty nylon thread with all stress points reinforced for maximum durability.

This rig, as well as all of our other tactical thigh rigs, features a heavy duty 2" side release buckle attached to the vertical hanger strap which allows for rapid removal of the rig. This allows users to efficiently switch loadouts without even having to remove their belt.   

The fully adjustable double leg straps are made with comfortable, yet durable, 2" webbing with heavy duty side release buckle closures and heavy duty elastic loops to allow for expansion of the thigh straps during movement. The leg straps also feature 2 rows of imbedded rubber stitching on the inside to prevent shifting and movement of the rig. Both leg straps are removable as well as reversible for left handed users.

Note: The pouches on this rig are designed to hold mil-spec type M-16/AR-15 magazines. However, we've found that 30 round magazines of a similar size as the mil-spec M-16/AR-15 such as those for the Mini-14 will work quite well. Please call or email if you have questions concerning fit.  

Specter Gear 20 Round 12ga. Tactical Thigh Rig

!

Army Digital Black, Coyote Tan, Olive Drab

This rig carries 20 12ga. shotshells in 2 pouches attached to a leg shroud with a vertically adjustable hanger strap to suspend the pouches below the belt line with 2 adjustable 2" wide leg straps to secure the assembly to the upper thigh.

The pouches are constructed from 2 layers of 1000 denier nylon and feature hook and loop closures for rapid access and re-secure. Each pouch features 2 rows of heavy duty elastic shell loops, each holding 5 shells for a total of 10 shells in each pouch and 20 rounds total for the rig. Both pouch flaps feature hook and loop strips on the inside of the flap that allows the pouch flap to be folded and lock out of the way in the open position for easy access to the shells. All stitches are made with heavy duty nylon thread with all stress points reinforced for maximum durability.

This rig, as well as all of our other tactical thigh rigs, features a heavy duty 2" side release buckle attached to the vertical hanger strap which allows for rapid removal of the rig. This allows users to efficiently switch loadouts without even having to remove their belt.   

The fully adjustable double leg straps are made with comfortable, yet durable, 2" webbing with heavy duty side release buckle closures and heavy duty elastic loops to allow for expansion of the thigh straps during movement. The leg straps also feature 2 rows of imbedded rubber stitching on the inside to prevent shifting and movement of the rig. Both leg straps are removable as well as reversible for left handed users.

Pouch flaps locked open to allow easy access to the shells.

Note that the pouches are vertically spaced with sufficient room to allow full access to the lower shell pouch.

 

Specter Gear 4 Mag, 30 rd. 5.56mm M-16/AR-15 Mag Tactical Thigh Rig

!

Army Digital Black, Coyote Tan, Olive Drab

This rig carries 4 mil-spec M-16/AR-15 type 5.56mm 30 round magazines in two pouches attached to a leg shroud with a vertically adjustable hanger strap to suspend the pouches below the belt line with 2 adjustable 2" wide leg straps to secure the assembly to the upper thigh.

The pouch bodies are constructed with a 1000 denier nylon outer layer and a 420 denier nylon inner layer. The pouches feature both hook and loop as well as side release buckle closures for maximum versatility and pouch security. Each pouch is supplied with a removable hook and loop silencer pad for quiet side release buckle operation. The flaps are constructed from 2 layers of nylon webbing for just the right degree of stiffness and to resist wear through points. All stitches are made with heavy duty nylon thread with all stress points reinforced for maximum durability.  

This rig, as well as all of our other tactical thigh rigs, features a heavy duty 2" side release buckle attached to the vertical hanger strap which allows for rapid removal of the rig. This allows users to efficiently switch loadouts without even having to remove their belt.   

The fully adjustable double leg straps are made with comfortable, yet durable, 2" webbing with heavy duty side release buckle closures and heavy duty elastic loops to allow for expansion of the thigh straps during movement. The leg straps also feature 2 rows of imbedded rubber stitching on the inside to prevent shifting and movement of the rig. Both leg straps are removable as well as reversible for left handed users.

Note: The pouches on this rig are designed to hold mil-spec type M-16/AR-15 magazines. However, we've found that 30 round magazines of a similar size as the mil-spec M-16/AR-15 such as those for the Mini-14 will work quite well. Please call or email if you have questions concerning fit.  

Specter Gear MOLLE Narrow Format Modular Tactical Thigh Rig

!

Black, Coyote Tan, Foliage Green, Olive Drab

This rig features 4 rows of MOLLE/PALS compatible modular webbing strips that allow the user to configure a tactical thigh rig with exactly the right pouches they want and need for the mission at hand.

The MOLLE/PALS webbing is attached to the carrier with heavy duty bartacks applied by state of the art programmable BAS machines.

This rig, as well as all of our other tactical thigh rigs, features a heavy duty 2" side release buckle attached to the vertical hanger strap which allows for rapid removal of the rig. This allows users to efficiently switch loadouts without even having to remove their belt.   

The fully adjustable double leg straps are made with comfortable, yet durable, 2" webbing with heavy duty side release buckle closures and heavy duty elastic loops to allow for expansion of the thigh straps during movement. The leg straps also feature 2 rows of imbedded rubber stitching on the inside to prevent shifting and movement of the rig. Both leg straps are removable as well as reversible for left handed users.

Our Narrow Format Modular Tactical Thigh Rig was specifically designed
to be used in conjunction with our Modular Tactical Holster, however......

.....it can also be used with any MOLLE/PALS compatible pouch to create a streamlined
thigh mounted load out for those who wish to carry a lighter thigh mounted load.

Specter Gear MOLLE Standard Format Modular Tactical Thigh Rig

!

Black, Coyote Tan, Foliage Green, Olive Drab

This rig features 4 rows of MOLLE/PALS compatible modular webbing strips that allow the user to configure a tactical thigh rig with exactly the right pouches they want and need for the mission at hand.

The MOLLE/PALS webbing is attached to the carrier with heavy duty bartacks applied by state of the art programmable BAS machines.

This rig, as well as all of our other tactical thigh rigs, features a heavy duty 2" side release buckle attached to the vertical hanger strap which allows for rapid removal of the rig. This allows users to efficiently switch loadouts without even having to remove their belt.   

The fully adjustable double leg straps are made with comfortable, yet durable, 2" webbing with heavy duty side release buckle closures and heavy duty elastic loops to allow for expansion of the thigh straps during movement. The leg straps also feature 2 rows of imbedded rubber stitching on the inside to prevent shifting and movement of the rig. Both leg straps are removable as well as reversible for left handed users.

A Few Possible Loadout Examples